FAAC J275/800 HA 2K high impact automatic hydraulic bollard for intensive use with a height above ground of 800m and a cylinder diameter of 275mm.
The FAAC J275/800 HA 2K high impact automatic hydraulic bollard is capable of stopping a 6,800kg lorry moving at 50 km/h (30mph) in dual unit installations.
Complete range of automatic hydraulic retractable bollards for the protection and safety of all areas that require controlled access.
Ideal for contexts of particular architectural interest, guaranteeing maximum reliability over time and requiring minimal maintenance.
NB. Our FAAC J275/800 HA 2K automatic bollards feature an installation pit, light crown, acoustic buzzer, reflective strip and 10 metres of cable as standard.
Purchasing Information:
1. Please select the amount of bollards from the drop down menu.
2. The FAAC range of bollards require a specific controller, please select from the drop down menu if required.
(NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).
3. We recommend transmitters for access control, please select the amount from the drop down menu if required.
4. For safety we recommend loop detectors, usually one loop detector per separate entrance or exit, please select from the drop down if required.
5. Loops detectors require specific loop cable in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops, please select if required.
