FAAC J200 HA H600 Hydraulic Automatic Bollard.With a height above ground of 600mm and a cylinder diameter of 200mm.
Hydraulic automatic bollard for the protection and safety of all areas that require controlled access.
Ideal for contexts of particular architectural interest, guaranteeing maximum reliability over time and requiring minimal maintenance.
Purchasing Information:1. Please select the amount of bollards from the drop down menu.
2. Select the total length sum of all bollard(s) cable.
3. The FAAC range of bollards require a specific controller, please select from the drop down menu if required.
(NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).
4. Select LED light crown kit (one per bollard) if bollard warning lights are required. Kit includes LED light crown, cable & power supply.
5. Select acoustic buzzer (one per bollard) if a motion warning alarm is required.
6. Select safety presure valve (one per bollard) if required. Reduces the risk of the bollard damaging the underside of vehicles.
7. We recommend transmitters for access control, please select the amount from the drop down menu if required.
8. For safety we recommend loop detectors, usually one loop detector per separate entrance or exit, please select from the drop down if required.
9. Loops detectors require specific loop cable in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops, please select if required.
10. For enhanced visual safety we recommend traffic lights, please select if required.
