<strong>BFT XPASS 800 K4 Anti-Terrorism Automatic Bollard</strong>
<strong>BFT XPASS 800 K4 Anti-Terrorism Automatic Bollard</strong>
<strong>BFT XPASS 800 K4 Anti-Terrorism Automatic Bollard</strong>

BFT XPASS 800 K4 Anti-Terrorism Automatic Bollard

£5,608.00
(Exc. 20% VAT)
£9,345.00
Saving Of
£3,737.00 (40%)
(£6,729.60 Inc. VAT)
+
Description
BFT XPASS B 800/275 L K4 (IWA/PAS Crash Tested) Anti-Terrorism Hydraulic Automatic Bollard.

For intensive use with a height above ground of 800mm, cylinder diameter of 275mm, raise speed of 7 seconds, lower speed of 4 seconds and a break in resistance of 667,000 Joules.

Anti-terrorism bollards tested and certified (crash-tested) by an independent body according to standards PAS 68 and IWA14-1 (equivalent to American standard “K4”). Each bollard has an independent pump so that in the event of a control unit failure, the other bollards in the environment remain functional.

The BFT XPASS 800 K4 Anti-Terrorism automatic hydraulic bollard features a LED light crown and reflective strip as standard.

Specifications
Specifications:

  • Hydraulic automatic bollard
  • Cylinder Diameter 275mm
  • Bollard height above ground 800mm
  • Steel FE 510 (S 335 JR) 10mm thick (steel version)
  • Powder coated RAL 7015 slate grey (steel version)
  • AISI 304 (1.4301) (stainless steel version)
  • Protection level IP67
  • Frequency of use 2000 operations per day
  • Raise speed 7 seconds
  • Lower speed 4 seconds
  • Fixed or flashing lights (8 around cylinder / 4 on top)
  • Fully assembled and pre-wired
  • Actuator weight 260kg
  • Power supply 230Vac 50Hz
  • Motor power 550W
  • Operating temperature -40°C +60°
  • Break in proof 667,000J
  • MCBF 3,000,000 cycles
  • Anti-Terrorism reference standard: PAS68:2013 V/7500 [N2]/48/90 
  • Anti-Terrorism reference standard: IWA14-1:2013 V/7200 [N2A]/48/90
  • Anti-Terrorism reference standard: ASTM2656:2007 M30
  • Stainless steel variant available at additional cost  
  • Purchasing

    Purchasing Information:

    1. Please select the amount of bollards from the drop down menu.

    2. The BFT range of bollards require a specific controller, please select from the drop down menu if required.

    (NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).

    3. We recommend transmitters for access control, please select the amount from the drop down menu if required.

    4. For safety we recommend safety loop detectors, usually one safety loop detector per separate entrance or exit, please select from the drop down if required.

    5. If you would like to drive up to the bollard and it drops automatically on exit, we recommend a free exit loop detector, please select from the drop down menu if required.

    6. All loops detectors (safety & free exit) require specific loop cable in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops, please select if required.

    7. Additional safety we recommend traffic lights, usually one traffic light per separate entrance or exit, please select from the drop down if required.

     

    Downloads
    Quotation
    BFT XPASS 800 K4 Anti-Terrorism Automatic Bollard

    Please contact us for discounts on bulk orders / trade customers.

    Sales Mobile: 07717 745047

    Alternatively please complete the form below.

    *
    *
    *
    *
    *
    Existing Customer
    *
    *
    *
    Please add the two numbers

    Model
    BFT-XPASS-800-K4
    Part Number
    BFT/XPASS/800/K4
    Manufacturer
    Bollard Type
    Automatic Bollard
    Material
    Steel
    Bollard Height
    800mm
    Bollard Diameter
    273mm
    Hydraulic
    Automatic Bollard
    PAS 68
    Automatic Anti-Terrorism Bollard
    BFT