<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>
<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>
<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>
<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>
<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>
<strong>BFT PILLAR B 800 Hydraulic Automatic Bollard</strong>

BFT PILLAR B 800 Hydraulic Automatic Bollard

£3,658.00
(Exc. 20% VAT)
£6,095.00
Saving Of
£2,437.00 (40%)
(£4,389.60 Inc. VAT)
+
Description
BFT PILLAR B 800 Hydraulic Automatic Bollard.

For intensive use with a height above ground of 800mm, cylinder diameter of 275mm, speed of 6.5 seconds and a break in resistance of 250,000 Joules.

Complete range of automatic hydraulic retractable bollards for the protection and safety of all areas that require controlled access.

Ideal for contexts of particular architectural interest, guaranteeing maximum reliability over time and requiring minimal maintenance.

The BFT PILLAR B 800 automatic bollard features a LED light crown, reflective strip and 6 metres of multi-core cable as standard.

Specifications
Specifications:

  • Hydraulic automatic bollard
  • Crash rated (extra 10mm skin)
  • Cylinder diameter 275mm
  • Bollard height above ground 800mm
  • Steel FE 360 6mm thick (steel version)
  • Powder coated RAL 7015 slate grey (steel version)
  • AISI 304 (1.4301) (stainless steel version)
  • Protection level IP67
  • Galvanised and anti-ram
  • Fitted with 6000mm multi core cable
  • Working cycle intensive use
  • Speed 6.5 seconds
  • Fixed or flashing lights (8 around cylinder / 4 on top)
  • Fully assembled and pre-wired
  • Easy and ready to install
  • Actuator weight 90Kg
  • Power supply 230Vac 50Hz
  • Motor power 300W
  • Operating temperature -15°C ÷ 60°C
  • Impact resistance 20,000J
  • Break in proof 250,000J
  • Different colours available at additional cost (steel version)
  • Purchasing

    Purchasing Information:

    1. Please select the amount of bollards from the drop down menu.

    2. The BFT range of bollards require a specific controller, please select from the drop down menu if required.

    (NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).

    3. We recommend transmitters for access control, please select the amount from the drop down menu if required.

    4. For safety we recommend safety loop detectors, usually one safety loop detector per separate entrance or exit, please select from the drop down if required.

    5. If you would like to drive up to the bollard and it drops automatically on exit, we recommend a free exit loop detector, please select from the drop down menu if required.

    6. All loops detectors (safety & free exit) require specific loop cable in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops, please select if required.

    7. Additional safety we recommend traffic lights, usually one traffic light per separate entrance or exit, please select from the drop down if required.

     

    Downloads
    Quotation
    BFT PILLAR B 800 Hydraulic Automatic Bollard

    Please contact us for discounts on bulk orders / trade customers.

    Sales Mobile: 07717 745047

    Alternatively please complete the form below.

    *
    *
    *
    *
    *
    Existing Customer
    *
    *
    *
    Please add the two numbers

    Model
    BFT-PILLAR-B-800
    Part Number
    BFT/PILLARB/800
    Manufacturer
    Bollard Type
    Automatic Bollard
    Material
    Steel
    Bollard Height
    800mm
    Bollard Diameter
    273mm
    Hydraulic
    Automatic Bollard
    BFT